Embedded Files
Tel:+86 512 5035 3196
Email: admin@signum.cc
China Customized Mist Spray Pump Assembly Machine Supplier
A: The mist spray pump assembly machine is an industrial equipment that automates the assembly of parts. It is primarily used for assembling various types of mist spray pumps, saving labor cost in high-precision, repetitive assembly tasks.. .
Q: How does mist spray pump assembly machine works?
A: An assembly machine for mist spray pump is a specialized automated equipment used to assemble the component parts of a plastic spray pump, including the housing, closure, piston assembly (piston, piston rod, bottom valve, and small spring), glass ball, large spring, gasket (PE, rubber), actuator, cover and dip tube. .
Q: Toothed slotted spring pin inserting machine?
A: Toothed slotted spring pin inserting machine is used for inserting the toothed slotted spring pin to the hinge hole of the Cosmetics Makeup Compact Matte Skin Care Powder Case. The case is consisted of two parts, that is, the lid and the jar.
Q: What is Lotion pump dip tube cutting and inserting machine?
A: The dip tube cutting and inserting machine, also know as Lotion pump assembly machine, is an automatic assembly equipment for fitting dip tube to lotion pump. It's a separate machine that can complete the assembly process. The feeding system is consisted of vibrating bowl feeder and tube stand.
Q: Introduction of Aerosol valve dip tube and actuator fitting machine
A: The aerosol valve dip tube and actuator fitting machine, also know as aerosol valve assembly machine, is an automatic assembly equipment for fitting both dip tube and actuator to aerosol valve. It's a separate machine that can complete the assembly process. With changeover parts, the machine is compatible with different designs and sizes of the aerosol valve, dip tube, and actuators.
A: Signum need pictures of the finished pumps and disassembled parts of the pump for a general idea. If the pump is common design, after confirming the disassembled parts availability time, proposal and quotation will be offerd. If the pump is not common design, we will need samples of the pump and if possible also the disassembled parts.
Q: Do you know how to use the racks/jigs for anodizing process?
Before anodizing, aluminum and aluminum alloy parts must be well mounted on the fixture. Some people may think that the hanger is a kind of tool for hanging the work-piece, and as long as the work-piece is hung firmly, it will have little effect on the quality of the coating. But the fact is just the opposite. It is such a simple hanger that plays a very important role in the quality and efficiency of electroplating. The design, selection and use of the hanger are directly related to the success or failure of electroplating.
We've sucessfully exported different kinds of assembly machines in the past year. Both by LCL and FLC shipments. All machines and equipments and devices are in good condition at our customers' facility because of our careful loading and protecting way.
Yes, we've a dedicated page for videos, and we've also set up our channel on Youtube for our customers' watching. They're grouped in different playlists for same or similar assembling functions. We'll keep uploading more HD videos for your watching in the future.
Report abuse